• Shop Products
  • Screw University
  • Knowledgebase
  • Contact Us
  • My Account
  • 0$0.00
  • Jump To Size
    • By Diameter
      • Lead Screws (inch)
        • 3/16" - 20, Acme
        • 1/4" - 20, Acme
        • 1/4" - 16, Acme
        • 1/4" X .100, Hi-Lead
        • 1/4" X .250, Hi-Lead
        • 1/4" X .333, Torqspline
        • 3/8" - 20, Acme
        • 3/8" - 16, Acme
        • 3/8" - 12, Acme
        • 3/8" - 10, Acme
        • 3/8" - 8, Acme
        • 3/8" X .167, Hi-Lead
        • 3/8" X .200, Hi-Lead
        • 3/8" X .250, Hi-Lead
        • 3/8" X .375, Hi-Lead
        • 3/8" X .500, Torqspline
        • 3/8" X 1.000, Torqspline
        • 7/16" X 1.000, Torqspline
        • 1/2" - 10, Acme
        • 1/2" - 8, Acme
        • 1/2" X .200, Hi-Lead
        • 1/2" X .250, Hi-Lead
        • 1/2" X .333, Hi-Lead
        • 1/2" X .500, Hi-Lead
        • 5/8" - 10, Acme
        • 5/8" - 8, Acme
        • 5/8" - 7, Acme
        • 5/8" X .200, Hi-Lead
        • 5/8" X .250, Hi-Lead
        • 11/16" X .500, Hi-Lead
        • 3/4" - 16, Acme
        • 3/4" - 10, Acme
        • 3/4" - 8, Acme
        • 3/4" - 7, Acme
        • 3/4" - 6, Acme
        • 3/4" - 5, Acme
        • 3/4" - 5, Acme
        • 3/4" X .250, Hi-Lead
        • 3/4" X .333, Hi-Lead
        • 3/4" X .500, Hi-Lead
        • 3/4" X 1.000, Torqspline
        • 3/4" X 1.500, Torqspline
        • 7/8" - 6, Acme
        • 7/8" - 5, Acme
        • 1" - 10, Acme
        • 1" - 8, Acme
        • 1" - 7, Acme
        • 1" - 6, Acme
        • 1" - 5, Acme
        • 1" - 4, Acme
        • 1" X .250, Hi-Lead
        • 1" X .333, Hi-Lead
        • 1" X .400, Hi-Lead
        • 1" X .500, Hi-Lead
        • 1" X 1.000, Hi-Lead
        • 1" X 2.000, Torqspline
        • 1 1/8" - 5, Acme
        • 1 1/8" X .333, Hi-Lead
        • 1 3/16" X 1.200, Torqspline
        • 1 1/4" - 16, Acme
        • 1 1/4" - 5, Acme
        • 1 1/4" - 4, Acme
        • 1 1/4" X .400, Hi-Lead
        • 1 3/8" - 4, Acme
        • 1 7/16" X 3.000, Torqspline
        • 1 1/2" - 10, Acme
        • 1 1/2" - 5, Acme
        • 1 1/2" - 4, Acme
        • 1 1/2" - 2.667, Acme
        • 1 1/2" X .400, Hi-Lead
        • 1 1/2" X .500, Hi-Lead
        • 1 1/2" X .750, Hi-Lead
        • 1 3/4" - 4, Acme
        • 1 3/4" - 3, Acme
        • 1 7/8" X 4.000, Torqspline
        • 2" - 4, Acme
        • 2" - 3, Acme
        • 2" X .500, Hi-Lead
        • 2" X .666, Hi-Lead
        • 2" X 1.000, Hi-Lead
        • 2 1/4" - 4, Acme
        • 2 1/2" - 4, Acme
        • 2 1/2" - 3, Acme
        • 2 1/2" - 2, Acme
        • 2 3/4" X 6.000, Torqspline
        • 3" - 4, Acme
        • 3" - 3, Acme
        • 3" - 2, Acme
        • 3 1/2" - 2, Acme
      • Lead Screws (metric)
        • 10" X 2.000, Trapezoidal
        • 12" X 3.000, Trapezoidal
        • 14" X 3.000, Trapezoidal
        • 16" X 3.000, Trapezoidal
        • 16" X 4.000, Trapezoidal
        • 18 X 4.000, Trapezoidal
        • 20" X 4.000, Trapezoidal
        • 24" X 5.000, Trapezoidal
        • 28" X 5.000, Trapezoidal
        • 30" X 6.000, Trapezoidal
        • 32" X 6.000, Trapezoidal
        • 36" X 6.000, Trapezoidal
        • 40" X 7.000, Trapezoidal
        • 44" X 7.000, Trapezoidal
        • 48" X 8.000, Trapezoidal
        • 52" X 8.000, Trapezoidal
      • Ball Screws
        • 3/8" X .125, Recirculating
        • 1/2" X .500, Recirculating
        • 5/8" X .200, Recirculating
        • 3/4" X .200, Recirculating
        • 3/4" X .500, Recirculating
        • 1" X .250, Recirculating
        • 1" X .333, Recirculating
        • 1" X .500, Recirculating
        • 1" X 1.000, Recirculating
        • 1 1/2" X .500, Recirculating
        • 1 1/2" X 1.000, Recirculating
      • Freewheeling Ball Screws
        • 1/4" X .188, Freewheeling
        • 5/16" X .125, Freewheeling
        • 9/16" X .083, Freewheeling
        • 5/8" X .188, Freewheeling
        • 3/4" X .250, Freewheeling
        • 1" X .280, Freewheeling
    • By Lead
      • Lead Screws (inch)
        • 3/16" - 20, Acme
        • 1/4" - 20, Acme
        • 1/4" - 16, Acme
        • 1/4" X .100, Hi-Lead
        • 1/4" X .250, Hi-Lead
        • 1/4" X .333, Torqspline
        • 3/8" - 20, Acme
        • 3/8" - 16, Acme
        • 3/8" - 12, Acme
        • 3/8" - 10, Acme
        • 3/8" - 8, Acme
        • 3/8" X .167, Hi-Lead
        • 3/8" X .200, Hi-Lead
        • 3/8" X .250, Hi-Lead
        • 3/8" X .375, Hi-Lead
        • 3/8" X .500, Torqspline
        • 3/8" X 1.000, Torqspline
        • 7/16" X 1.000, Torqspline
        • 1/2" - 10, Acme
        • 1/2" - 8, Acme
        • 1/2" X .200, Hi-Lead
        • 1/2" X .250, Hi-Lead
        • 1/2" X .333, Hi-Lead
        • 1/2" X .500, Hi-Lead
        • 5/8" - 10, Acme
        • 5/8" - 8, Acme
        • 5/8" - 7, Acme
        • 5/8" X .200, Hi-Lead
        • 5/8" X .250, Hi-Lead
        • 11/16" X .500, Hi-Lead
        • 3/4" - 16, Acme
        • 3/4" - 10, Acme
        • 3/4" - 8, Acme
        • 3/4" - 7, Acme
        • 3/4" - 6, Acme
        • 3/4" - 5, Acme
        • 3/4" - 5, Acme
        • 3/4" X .250, Hi-Lead
        • 3/4" X .333, Hi-Lead
        • 3/4" X .500, Hi-Lead
        • 3/4" X 1.000, Torqspline
        • 3/4" X 1.500, Torqspline
        • 7/8" - 6, Acme
        • 7/8" - 5, Acme
        • 1" - 10, Acme
        • 1" - 8, Acme
        • 1" - 7, Acme
        • 1" - 6, Acme
        • 1" - 5, Acme
        • 1" - 4, Acme
        • 1" X .250, Hi-Lead
        • 1" X .333, Hi-Lead
        • 1" X .400, Hi-Lead
        • 1" X .500, Hi-Lead
        • 1" X 1.000, Hi-Lead
        • 1" X 2.000, Torqspline
        • 1 1/8" - 5, Acme
        • 1 1/8" X .333, Hi-Lead
        • 1 3/16" X 1.200, Torqspline
        • 1 1/4" - 16, Acme
        • 1 1/4" - 5, Acme
        • 1 1/4" - 4, Acme
        • 1 1/4" X .400, Hi-Lead
        • 1 3/8" - 4, Acme
        • 1 7/16" X 3.000, Torqspline
        • 1 1/2" - 10, Acme
        • 1 1/2" - 5, Acme
        • 1 1/2" - 4, Acme
        • 1 1/2" - 2.667, Acme
        • 1 1/2" X .400, Hi-Lead
        • 1 1/2" X .500, Hi-Lead
        • 1 1/2" X .750, Hi-Lead
        • 1 3/4" - 4, Acme
        • 1 3/4" - 3, Acme
        • 1 7/8" X 4.000, Torqspline
        • 2" - 4, Acme
        • 2" - 3, Acme
        • 2" X .500, Hi-Lead
        • 2" X .666, Hi-Lead
        • 2" X 1.000, Hi-Lead
        • 2 1/4" - 4, Acme
        • 2 1/2" - 4, Acme
        • 2 1/2" - 3, Acme
        • 2 1/2" - 2, Acme
        • 2 3/4" X 6.000, Torqspline
        • 3" - 4, Acme
        • 3" - 3, Acme
        • 3" - 2, Acme
        • 3 1/2" - 2, Acme
      • Lead Screws (metric)
        • 10" X 2.000, Trapezoidal
        • 12" X 3.000, Trapezoidal
        • 14" X 3.000, Trapezoidal
        • 16" X 3.000, Trapezoidal
        • 16" X 4.000, Trapezoidal
        • 18 X 4.000, Trapezoidal
        • 20" X 4.000, Trapezoidal
        • 24" X 5.000, Trapezoidal
        • 28" X 5.000, Trapezoidal
        • 30" X 6.000, Trapezoidal
        • 32" X 6.000, Trapezoidal
        • 36" X 6.000, Trapezoidal
        • 40" X 7.000, Trapezoidal
        • 44" X 7.000, Trapezoidal
        • 48" X 8.000, Trapezoidal
        • 52" X 8.000, Trapezoidal
      • Ball Screws
        • 3/8" X .125, Recirculating
        • 1/2" X .500, Recirculating
        • 5/8" X .200, Recirculating
        • 3/4" X .200, Recirculating
        • 3/4" X .500, Recirculating
        • 1" X .250, Recirculating
        • 1" X .333, Recirculating
        • 1" X .500, Recirculating
        • 1" X 1.000, Recirculating
        • 1 1/2" X .500, Recirculating
        • 1 1/2" X 1.000, Recirculating
      • Freewheeling Ball Screws
        • 1/4" X .188, Freewheeling
        • 5/16" X .125, Freewheeling
        • 9/16" X .083, Freewheeling
        • 5/8" X .188, Freewheeling
        • 3/4" X .250, Freewheeling
        • 1" X .280, Freewheeling

anshelyschinca

800-GO-ROTON (800-467-6866)
Home > …
  • Profile
  • Topics Started
  • Replies Created
  • Engagements
  • Favorites

@anshelyschinca

Profile

Registered: 5 days, 1 hour ago

Giải Mã Sự Xung Đột ODDY Giữa Sàn Châu Âu Và Châu Á – Kho Báu Bị Bỏ Quên Bản chất của hai hệ thống định giá lớn nhất thế giới Trong nhận định kèo nhận định kèo oddy, người chơi thường mắc sai lầm khi chỉ tập trung vào một bảng kèo duy nhất. Thực tế, thị trường cá cược bóng đá được vận hành bởi hai hệ thống tư duy khác nhau: Châu Âu (1x2) và Châu Á (Handicap). Trong khi ODDY Châu Âu phản ánh xác suất thắng-hòa-thua thuần túy, thì ODDY Châu Á lại là sự cân bằng về thực lực thông qua các tỷ lệ chấp. Sự khác biệt này tạo ra một "khe hở" thông tin cực lớn. Đôi khi, ODDY Châu Âu của một đội bóng đang giảm mạnh (thể hiện niềm tin vào chiến thắng), nhưng ODDY Châu Á lại không có sự dịch chuyển tương ứng. Đây chính là lúc người chơi nhận định kèo ODDY cần vào cuộc để tìm kiếm sự bất thường. Kỹ thuật chuyển đổi ODDY để tìm ra sai số Một chuyên gia thực thụ sẽ biết cách quy đổi ODDY Châu Âu sang tỷ lệ chấp Châu Á tương ứng. Ví dụ, một mức ODDY Châu Âu cho cửa thắng của đội nhà là 1.50 thường tương ứng với kèo chấp 1 trái (1.0). Tuy nhiên, nếu nhà cái chỉ để kèo chấp là 0.75 với ODDY ăn thấp cho cửa trên, điều này cho thấy nhà cái đang cực kỳ e dè cửa thắng của đội nhà nhưng lại muốn giảm thiểu rủi ro nếu họ chỉ thắng cách biệt 1 bàn. Việc nhận định kèo ODDY thông qua phép đối chiếu này giúp bạn nhận diện được "giới hạn chịu đựng" của nhà cái. Nếu ODDY Châu Âu giảm sâu nhưng kèo chấp Châu Á lại tăng mức ăn lên cao, đó là dấu hiệu của việc nhà cái đang cố tình tạo ra sự hấp dẫn giả tạo ở kèo Handicap để hướng người chơi bỏ qua kèo thắng thua trực tiếp. Đây là một cái bẫy tinh vi mà chỉ những người biết nhìn cả hai bảng kèo mới có thể thoát ra được. Chiến thuật "Arbitrage" – Tận dụng sự lệch pha thị trường Dù việc đánh đối ứng (Arbitrage) giữa các sàn không còn dễ dàng như trước, nhưng việc nhận định sự lệch pha ODDY vẫn mang lại lợi thế khổng lồ. Khi bạn thấy sàn Châu Âu đã điều chỉnh ODDY theo thông tin mới nhất nhưng sàn Châu Á vẫn còn "độ trễ", đó là thời điểm vàng để vào lệnh. Hãy luôn giữ thói quen quan sát ít nhất 3 nhà cái Châu Âu hàng đầu để làm hệ quy chiếu cho bảng ODDY Châu Á mà bạn đang chơi. Sự nhạy bén trong việc phát hiện các điểm xung đột giữa xác suất thắng thuần túy và tỷ lệ chấp sẽ giúp bạn nâng tỷ lệ thắng lên một tầm cao mới, nơi bạn không còn đoán mò mà đang phân tích sự dịch chuyển của cả một hệ thống tài chính bóng đá toàn cầu. Social: https://www.divephotoguide.com/user/nhandinhkeooddy1 https://forum.tkool.jp/index.php?members/nhandinhkeooddy.95873/#about https://telescope.ac/nhan-dinh-keo-oddy/5j9mpmqi1as58acvfv9pp0 https://drivehud.com/forums/users/anshelyschinca/ https://umczdt.ru/forum/?PAGE_NAME=profile_view&UID=156295 https://datcang.vn/viewtopic.php?f=11&t=919976 http://jobboard.piasd.org/author/nhandinhkeooddy1/ https://www.fantasyplanet.cz/diskuzni-fora/users/nhandinhkeooddy1/ http://gojourney.xsrv.jp/index.php?nhandinhkeooddy1 https://www.hoaxbuster.com/redacteur/nhandinhkeooddy1 https://www.thetriumphforum.com/members/nhandinhkeooddy1.55353/ https://hanson.net/users/nhandinhkeooddy1 https://www.hogwartsishere.com/1813481/ http://techou.jp/index.php?nhandinhkeooddy1 http://tkdlab.com/wiki/index.php?nhandinhkeooddy1 http://wiki.0-24.jp/index.php?nhandinhkeooddy1 https://idol.st/user/131121/nhandinhkeooddy1/ https://doc.anagora.org/s/0MHqLb3H5 https://www.shippingexplorer.net/en/user/nhandinhkeooddy1/251879 https://schoolido.lu/user/nhandinhkeooddy1/ https://acomics.ru/-nhandinhkeooddy1 https://tudomuaban.com/chi-tiet-rao-vat/2816380/nhan-dinh-keo-oddy.html https://quicknote.io/fad41ff0-04ba-11f1-8319-d3d7abcb70ac https://aprenderfotografia.online/usuarios/nhandinhkeooddy1/profile/ https://1wum.ru/forum/?PAGE_NAME=profile_view&UID=54673&MUL_MODE= http://jobs.emiogp.com/author/nhandinhkeooddy1/ https://anotepad.com/notes/kxpdgetc https://chanylib.ru/ru/forum/user/18301/ https://www.live4cup.com/f-sp47885-.html#p47885 https://paper.wf/nhandinhkeooddy1/nhandinhkeooddy1 https://bioqoo.com/nhandinhkeooddy1 https://rant.li/nhandinhkeooddy1/nhandinhkeooddy1 https://www.halaltrip.com/user/profile/315718/nhandinhkeoodd/ https://inkbunny.net/nhandinhkeooddy1?&success=Profile+settings+saved. https://forum.herozerogame.com/index.php?/user/150275-nhandinhkeooddy/ https://divisionmidway.org/jobs/author/nhandinhkeooddy1/ https://www.linqto.me/about/nhandinhkeooddy1 https://jali.me/nhandinhkeooddy1 https://biolinku.co/nhandinhkeooddy1 https://jaga.link/nhandinhkeooddy1 http://vetstate.ru/forum/?PAGE_NAME=profile_view&UID=243984&backurl=%2Fforum%2F%3FPAGE_NAME%3Dprofile_view%26UID%3D243918 https://fyers.in/community/member/c8sVwJ9NKw http://forum.modulebazaar.com/forums/user/nhandinhkeooddy1/ https://community.alexgyver.ru/members/nhandinhkeooddy1.160068/#about https://animeforums.net/profile/46543-nhandinhkeooddy1/?tab=field_core_pfield_1 https://www.laundrynation.com/community/profile/nhandinhkeooddy1/ https://www.ltstesting.com/profile/anshelyschinca13530/profile https://www.fruitpickingjobs.com.au/forums/users/nhandinhkeooddy1/ https://espritgames.com/forum/users/49992869 https://able2know.org/user/nhandinhkeooddy1/ https://ngel.ink/nhandinhkeooddy1 https://qoolink.co/nhandinhkeooddy1 https://jali.pro/nhandinhkeooddy1 https://pbase.com/nhandinhkeooddy1 https://www.nedrago.com/forums/users/nhandinhkeooddy1/ https://www.klamm.de/forum/members/nhandinhkeooddy1.164783/#about https://jobs.siliconflorist.com/employers/4012797-nh-n-d-nh-keo-oddy https://jakle.sakura.ne.jp/pukiwiki/?nhandinhkeooddy1 https://justpaste.it/lv1mr


Forums

Topics Started: 0

Replies Created: 0

Forum Role: Participant

  • Shop Products
    • Quick Select Guide
      • Lead Screws
      • Metric Lead Screws
      • Ball Screws
    • All Lead Screws & Nuts
      • Engineering Data
      • All Lead Screws
      • All Sleeve Nuts
      • All Threaded Mount Nuts
      • All Mounting Flanges
      • All Steel Nuts
      • All Speed Ball Wing Nuts
    • Acme Lead Screws & Nuts
      • General Information
      • Engineering Data
      • Screws
      • Sleeve Nuts
      • Threaded Mount Nuts
      • Mounting Flanges
      • Anti-Backlash Flange Nuts
      • Steel Nuts
      • Acme Lead Screw Flange Nuts
      • Speed Ball Wing Nuts
    • Hi-Lead® Screws & Nuts
      • General Information
      • Engineering Data
      • Screws
      • Sleeve Nuts
      • Hi-Lead® Screw Flange Nuts
      • Threaded Mount Nuts
      • Mounting Flanges
      • Hi-Lead® Screw Anti-Backlash Flange Nut
    • Torqspline® Screws & Quiknuts®
      • General Information
      • Engineering Data
      • Screws
      • Sleeve Nuts
      • Torqspline Screw Flange Nuts
      • Threaded Mount Nuts
      • Torqspline Screw Anti-Backlash Flange Nut
      • Mounting Flanges
    • Trapezoidal Lead Screws & Nuts
      • General Information
      • Engineering Data
      • Screws
      • Sleeve Nuts
      • Trapezoidal Lead Screw Flange Nuts
      • Threaded Mount Nuts
      • Mounting Flanges
    • Ball Screws and Ball Nuts
      • General Information
      • Engineering Data
      • Ball Screws
      • Ball Nuts
      • Mounting Flanges
    • Freewheeling Ball Screws & Ball Nuts
      • General Information
      • Engineering Data
      • Ball Screws
      • Ball Nuts
      • Mounting Flanges
    • Worms
      • General Information
      • Diametral Pitch Worm Thread Dimensions
      • Module Worm Thread Dimensions
    • Taps for Lead Screw Thread Forms
      • Taps for Lead Screw Thread Forms – General Information
  • Screw University
    • Screw Basics
      • Screw Thread Standards
      • Basics of Actuating Screws
      • Screw Motions
    • Types of Screws
      • Power Screws Basics & Materials
        • Speed for Power Screws
        • Power Screw – Wear Life
      • Ball Screws
        • Ball Screw – Speed
        • Ball Screw Wear Life
    • Identifying Screw Threads
      • Screw Thread Form
      • Screw Thread Pitch
      • Major & Minor Diameter
      • Pitch Diameter
      • Hand of the Thread
    • Screw Actions
      • Application Engineering: Speed
      • Screw Backdriving Efficiency
      • Column Loading
        • Horizontal Bending
        • Torsional & Axial Deflection
      • End Fixity
      • Screw Shaft Straightness & Defects
        • Methods of Achieving Straightness
        • Preserving Straightness in Screws
        • How to Straighten Screws
      • Screw Wear Life
        • Wear Mechanism
        • Screw and Nut Material Selection
        • Monitoring Wear
        • Wear Equations
    • Formula Calculators
      • Torque-Forward Drive
      • Torque-Backdrive
      • Key Torque-Forward Drive
      • Key Torque-Backdrive
      • Speed Calculator
      • Drive Horsepower-Rotary
      • Drive Horsepower-Linear
      • Critical Speed
      • Column Loading
      • Efficiency – Power Screws – Forward Drive
      • Efficiency – Power Screws – Backdrive
      • Lead Angle
      • Wear Life for Ball Screws
      • Acceleration Force Objects in Linear Motion
      • Acceleration Torque Objects in Rotary Motion
    • Glossary
  • Knowledgebase
    • Engineering Bulletins
      • Ball Screws
      • Flanges
      • Power Screws
      • Steel Nuts
    • Ask the Engineer
    • FAQ
      • Products
      • Purchasing

Roton Products, Inc. - Quality screws & nuts for power transmission® Roton Products, Inc. | 645 East Elliott Ave, Kirkwood, MO 63122 | Toll Free: 800-GO-ROTON (800-467-6866)

Fax: 314-821-4818 | Outside US: 314-821-4400 | sales@roton.com

©1997-2026 Roton Products, Inc. All rights reserved. |Lead Time & Inventory Information |Return Policy